Valley Design // Flipping/Nesting Mechanisms

Thank you for visiting Valley Design.

Looking for news?

Join our email list to receive up-to-date information and news from Valley Design.

Email Address *
* required  
Products
OEM Exclusive Product Open Line Product
Open Line Product
Flipping Mechanisms
Genu-Flip Kit 

Easily flip your table tops for efficient nesting storage. The mechanism combines function and efficiency by allowing the user to operate it from either end of the top. Flip and roll without taking a step.

Advantages
  • Access latch from either end of the top for a quick flip and roll
  • Easy to install with surface mount and simple assembly
  • Design allows plenty of room for electrical components
  • Compact nesting minimizes storage space to only 4⅜" per table
  • Positive lock in both the vertical and horizontal position
  • Secure from accidental release during use
  • Shipped partially knocked down to reduce freight costs
  • Fits any Valley Design end base series

 

Dimensions
  • Available for tables 36"42” 48” 54” 60” 66” 72”
  • To determine item number, subtract 12" from the length of the table. Use this number at the end of the GFLIP item number, for example GFLIP-48. This number is the center-to-center dimension.
  • For odd size tables, use the next SMALLER 6" increment.
  • Maximum table depth is 36" for a centered base.
  • Maximum table depth is 30" for cantilevered base with offset columns.
(These maximums apply to standard Valley Design bases. Any special bases must be checked for clearance.)
NOTE: Table bases are not included in the pricing.

 

Genu-Flip Kit™ Includes
  • Two (2) Genu-Flip mechanisms and connector rod. Standard black.
Genu-Flip Genu-Flip

 

Nesting Dimensions
  • Storage Depth = Mainbar length + (# of tables -1) x 4.38"
  • Storage Width = Table width + (# of tables -1) x 2.25"
  • Maximum Storage Width = Table width + 6.75" (table 5 aligns with table 1)
Nester Top View
(Top view of nested tables.)
Genu-Flip Genu-Flip

 

 

Open Line Product
Nester Series
Nester Series
X-Base 

When you experience the advantages of a flip-top table in providing easy, compact storage, you will be doing flips of your own. The X-base nester is specifically built with nesting in mind. The base prongs are bent in a way to allow them to roll under the next base giving you the tightest nesting dimension possible.

Columns

  • 3" diameter, 14 gauge steel

Main Bars / Feet

  • ½" thick steel

Mounting Plates

  • Genu-Fold3

Locking Caster

  • 4 – 3" diameter with 5/16" - 18 stem

Standard Height

  • 27 ¾"

Finishes

  • Not available in chrome

Shipped

  • Knocked down or assembled
Available Options
Option Designator
Assembly -A
  • Wire Management
    • Door, integrated into column, with spring-loaded hinge
    • Aluminum cover, snaps onto column, standard finishes (Not available in chrome)

-WM
-WMC
  • Numa-Lift™ — Patented Gas Assist
    • Standard height range with casters — 26 11/16"– 38 11/16"
    • Not available in chrome
-NU
Deduct Casters — Locking (4) Reference No Casters
Less Than 27¾" (Price per column) -SCUST
Greater Than 27¾" (Price per column) -CUST
Nester X-Base - Single Columns
Item # Base Spread Max. Table Size Round Max. Table Size Square
317N3018LC 18" x 18" 24" 20" x 20"
317N3022LC 22" x 22" 30" 26" x 26"
317N30226LC 22" x 26" N/A 26" x 32"
317N3026LC 26" x 26" 34" 30" x 30"
317N3030LC 30" x 30" 38" 34" x 34"
317N3032LC 32" x 32" 42" 38" x 38"
Nester Series

 

 

 

Flip Top
Flip Top 
 
Fixed and Detachable Flip Top Mechanism
  • Fixed and detachable flip top mechanisms allow the tables to be flipped into a position parallel to the column
  • Detachable flip top mechanism allows top to be easily detached from base assembly
  • Allows for ease in storage and moving
  • May be purchased as an accessory to our base or separately
  • Fits the following single column end and X-Base series: Tubular Series; Fountain Series 105, 205, 206 and 209, Laser Cut Series and the Pedestal Disk Series

Item # Description
00049 Fixed Flip Top Mechanisms
00159 Detachable Flip Top Mechanisms
fixed and detachable flip top mech

 

 

 

Nester
Dual Leg Nester 

The Dual Leg version allows tables to flip for easy push away storage. Super-size the order for large tables by making it a Double Column Version.

Compatible Base Options

  • All Valley Design end base series

Mounting Plates

  • 5" x 5" x ¼" steel

Nester Extrusion

  • 5 ½" wide by full length of extrusion. Extrusion lengths 36", 48", 60", 72". Powder coat black finish only on extrusion hardware

Top Size

  • Available for tops with a width of 18", 24", 30" or 36". Minimum top thickness of 1 ⅛"

Assemblies

  • One or two latch assemblies used to latch table in setup position. Latches require recessed pocket in table top. Contact Valley Design for router pattern

• Add NS prefix to bases when ordering to designate 5" x 5" x ¼" mounting plate (Ex. NS1012026) • Recommended to use next larger size base when using cantilevered bases.
Valley Design must supply the router pattern to ensure proper installation of the Nester Series.
• Cannot be used in conjunction with Genu-Fold3 mechanisms.
• Standard: Black
• Call for pricing on custom size tops.

Available Options
Option Designator
  • Double latch application
    • (required for 72"-84" long and all 36" wide tables)
-2P
Nester Modesty Panel Hinge 5005
  • Wire Management Trough
    • Nylon Strip 4" x 12" x .04"
WMTROUGH
Dual Leg Nester Mechanism
Item # Description
NS - (table width) x (table length) Single latch application
   

Specification Example for a 20" x 48" table:

  • Qty 1, NS-20x48-30, Nester Kit for a table w/legs spaced 30" apart on center
  • Qty 2, NS101-16PALC, 101 series 16" end bases, Nester mount, locking casters
Nesting Dimensions
Nester
  • Storage Depth = Mainbar length + (# of tables -1) x 7.25"
  • Storage Width = Table width + (# of tables -1) x 2.25"
  • Maximum Storage Width = Table width + 6.75" (table 5 aligns with table 1)
Nester Series

 

 

Nester Double Column
Double Column  

Compatible Base Options

  • All Valley Design end base series

Mounting Plates

  • 5" x 11" x ¼" steel

Nester Extrusion

  • Two 5½" wide aluminum extrusions support top and bases. Extrusion lengths 36", 48", 60", 72". Powder coat black finish only on extrusion hardware

Top Size

  • Available for 60" diameter, 48" square, 48" x 60" and 48" x 72". Minimum top thickness of 1 ⅛"

Assemblies

  • Two latch assemblies used to latch table in setup positions. Lever arm used to support top in flipped position. Latches and lever arm require recessed pocket in table top. Contact Valley Design for router pattern

Available Options
Option Designator
  • Double latch application
    • (required for 72"-84" long and all 36" wide tables)
-2P
Nester Modesty Panel Hinge 5005
  • Wire Management Trough
    • Nylon Strip 4" x 12" x .04"
WMTROUGH
 
Double Column Nester Mechanism
Item # Description
NSD - (table width) x (table length) Double Column Nester Mechanism
   

Specification Example for a 60" round table

  • Qty 1, NSD-60RD-30, Nester Kit for double column end bases spaced 30" apart on center
  • Qty 2, NSD401-32PALC, 401 Arch base series 32" double column bases, nester mount, 3" locking casters


Specification example for a 42" x 60" table

  • Qty 1, NSD-42x60-42, Nester Kit for double column end bases spaced 42" apart on center
  • Qty 2, NSD101-30PALC, 101 series 30" double column end bases, nester mount, 3" locking casters
Nesting Dimensions
Nester Series Valley Design
  • Storage Depth = Mainbar length + (# of tables -1) x 13.25"
  • Storage Width = Table width + (# of tables -1) x 2.25"
  • Maximum Storage Width = Table width + 6.75" (table 5 aligns with table 1)
Nester Series